How to Hang Curtains Like a Pro | EZcurtain Guide for Drapes

Want your curtains to look like they were installed by a pro? You’re not alone. A well-hung curtain can completely elevate the style and functionality of a room. At EZcurtain, we help you achieve that perfect custom-drapery look — without needing to hire a pro.

This guide will walk you through how to hang curtains, from choosing the right curtain rods to measuring, mounting, and styling — especially if you’re working with custom drapery rods or EZcurtain's  premium custom linen curtains.

Why Proper Curtain Installation Matters

Hanging curtains correctly can:

• Create the illusion of higher ceilings

• Frame your windows beautifully

• Maximize natural light while maintaining privacy

• Prevent fabric from dragging or bunching awkwardly

Whether you're working with pinch pleat drapes, grommet panels, or soft-top linen styles, following the right steps ensures your custom curtains look stunning and function flawlessly.

Step 1: Choose the Right Curtain Rods

The rod is the foundation. Choose sturdy, stylish rods that match your drapery and room decor.

Tip: EZcurtain recommends choosing rods that match or complement your hardware and window trim. If you’re unsure, neutral matte black is always a safe bet. Or contact us for more advices.

Step 2: Where to Hang Curtain Rods

Placement matters more than you think. Many homeowners ask "Where to hang curtain rods?" Here’s the formula we recommend:

• Height: Install rods 6-10 inches above the window frame to visually heighten the ceiling.

• Width: Extend rods 5-15 inches beyond each side of the window to allow the curtains to stack without blocking natural light.

• Mounting Type: Wall mount is most common; ceiling mounts work great for extra drama or when there’s little wall space.

Proper placement helps avoid that awkward, "half-covered" look and ensures your custom curtains from EZcurtain hang beautifully.

Step 3: Measure Your Windows

Before drilling, measure carefully. 

1. Width: Measure the full width of your curtain rod (not just the window).

2. Height: Measure from the rod to where you want the curtains to fall — typically just brushing the floor or puddling slightly (1–2 inches).

Need help? EZcurtain offers a full Measuring Guide to walk you through every step. No more guessing. No more bad fits.

If you're not sure how to measure curtains or rods or windows, please contact us at any time for help. 

Step 4: How to Hang Curtain Rods

Here’s how to mount your drapery rods securely:

1. Use a tape measure and level to mark the bracket positions evenly on both sides.

2. Drill pilot holes into the wall and install anchors if needed.

3. Screw the mounting brackets securely.

4. Slide the curtain rod into place and tighten any set screws.

5. Hang your EZcurtain drapes using hooks, grommets, or rod pockets — depending on your chosen style.

EZcurtain Tip: Always test that the rod can support the full weight of your curtains before finishing installation.

Step 5: Hang and Style Your Curtains

• Pinch pleat curtains from EZcurtain require curtain hooks. Space hooks evenly across the back pleat tape and hang on ring clips or directly onto the rod.

• Soft top or grommet curtains can be slid directly onto the rod.

• Adjust the folds for symmetry and fullness. EZcurtain panels come pre-styled for easy setup!

Add tiebacks or holdbacks for daytime styling and function.